KEPZ WSR-88D VAD Hodograph and Wind Profile
View the latest Velocity Azimuth Display (VAD) wind profile from the KEPZ WSR-88D NEXRAD weather radar near Santa Teresa-El Paso (TX), NM. The hodograph plots horizontal wind vectors by height above ground, with color-coded altitude layers and optional METAR surface-wind data.
Latest profile valid .
Decoded surface and VAD profile data
Surface observation
METAR KELP 020651Z 12013G24KT 10SM TS FEW042 BKN070 BKN100CB OVC150 22/17 A3016 RMK AO2 PK WND 12029/0639 WSHFT 0553 RAE29 SLP135 OCNL LTGICCGCC SE S AND SW TS SE S AND SW MOV S VIRGA ALQDS P0004 T02220172 403780211 $
VAD wind profile
| QC | Height AGL (m) | Speed (kt) | Direction (°) | RMS (kt) |
|---|---|---|---|---|
| OK | 10 | 13.0 | 120 | — |
| FAIL | 273 | 19.0 | 85 | 9.6 |
| FAIL | 334 | 18.0 | 80 | 9.1 |
| OK | 517 | 18.0 | 89 | 7.8 |
| OK | 578 | 17.0 | 92 | 8.3 |
| FAIL | 730 | 18.0 | 83 | 9.1 |
| OK | 883 | 19.0 | 89 | 7.2 |
| OK | 1005 | 18.0 | 51 | 7.0 |
| OK | 1188 | 19.0 | 72 | 6.3 |
| OK | 1340 | 22.0 | 48 | 7.5 |
| OK | 1492 | 24.0 | 51 | 6.3 |
| OK | 1675 | 24.0 | 40 | 7.7 |
| OK | 1797 | 24.0 | 43 | 7.4 |
| OK | 2102 | 26.0 | 46 | 7.2 |
| OK | 2163 | 27.0 | 49 | 7.2 |
| OK | 2407 | 29.0 | 41 | 7.2 |
| OK | 2712 | 30.0 | 33 | 6.8 |
| OK | 2742 | 31.0 | 34 | 7.3 |
| OK | 3016 | 33.0 | 27 | 5.9 |
| OK | 3321 | 35.0 | 38 | 6.4 |
| OK | 3413 | 36.0 | 40 | 7.0 |
| OK | 3626 | 36.0 | 29 | 8.7 |
| OK | 3931 | 40.0 | 27 | 7.8 |
| OK | 4236 | 31.0 | 25 | 5.3 |
| OK | 4540 | 33.0 | 23 | 4.2 |
| OK | 4845 | 27.0 | 25 | 5.1 |
| OK | 5150 | 28.0 | 18 | 4.7 |
| OK | 5302 | 28.0 | 14 | 5.3 |
| OK | 5455 | 28.0 | 11 | 4.5 |
| OK | 5760 | 25.0 | 4 | 3.6 |
| OK | 6064 | 21.0 | 5 | 4.0 |
| OK | 6308 | 15.0 | 0 | 3.9 |
| OK | 6369 | 15.0 | 0 | 3.9 |
| OK | 6674 | 13.0 | 3 | 3.0 |
| OK | 7284 | 14.0 | 353 | 4.0 |
| OK | 7375 | 14.0 | 355 | 4.6 |
| OK | 7893 | 16.0 | 0 | 4.1 |
| OK | 8503 | 15.0 | 355 | 3.4 |
| OK | 9417 | 12.0 | 6 | 2.9 |
| OK | 10332 | 9.0 | 4 | 2.6 |
QC keeps a level only where its wind speed exceeds twice its RMS fit error (the operational 2×RMS signal-to-noise test). FAIL rows are retained here for reference but excluded from QC-filtered plotting. A dash means the product reported no RMS for that level (kept, not assessable).